ariens model 921013 manual

The Ariens Model 921013 is a compact, powerful snow thrower designed for residential use. It features a durable steel auger, multiple speed settings, electric start capability, adjustable chute control, and easy maneuverability. Below are key sections covering safety, features, operation, maintenance, and troubleshooting for this model.

Features at a Glance

Key components: Steel auger, 4-cycle engine, electric start, adjustable skid shoes, chute control, and drift cutters.

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat, stable surface.

1. Attach handles: Align and secure with provided bolts and wrenches.
2. Install chute assembly: Connect chute to housing and secure control cable.
3. Attach skid shoes: Bolt to each side of the housing.
4. Add engine oil: Refer to engine manual for type and capacity.
5. Add fuel: Use fresh, unleaded gasoline.

WARNING! Machine is heavy; use assistance during assembly. Ensure all fasteners are tight before operation.

Controls and Operation

Locate all controls before starting. Front Panel: Electric start button, recoil starter, chute crank, speed selector.

Handle Controls: Drive control lever, auger control lever, safety key.

Starting: Insert safety key, set choke, press electric start or use recoil. Operation: Engage auger lever to throw snow; use drive lever to move machine. Chute Control: Turn crank to adjust direction. Skid Shoes: Adjust to control scraping depth.

Specifications

• Model: 921013
• Engine: 4-cycle, 208cc
• Clearing Width: 21 inches
• Intake Height: 13 inches
• Throw Distance: Up to 30 feet
• Speeds: 2 forward, 1 reverse
• Starting: Electric with recoil backup
• Fuel Capacity: 0.5 gallons
• Oil Type: SAE 5W-30
• Weight: Approx. 109 lbs

Maintenance Schedule

Regular maintenance ensures optimal performance and longevity.

1. Before each use: Check oil level, fuel, and tire pressure.
2. After each use: Clean snow and debris from housing and chute.
3. Every 25 hours: Change engine oil (refer to engine manual).
4. Every season: Inspect auger paddles, skid shoes, and scraper bar.
5. As needed: Lubricate control cables and pivot points.

CAUTION! Always disconnect spark plug before performing any maintenance.

Engine Care

Follow engine manufacturer's guidelines for specific care.

1. Oil: Check level before each use; change as specified.
2. Air Filter: Clean or replace periodically.
3. Spark Plug: Inspect and gap annually; replace if worn.
4. Fuel: Use fresh gasoline; add fuel stabilizer for storage.
5. Cooling Fins: Keep clean to prevent overheating.

Tip: Refer to the separate engine manual for detailed service intervals.

Storage Instructions

Proper storage prevents damage and ensures ready operation.

1. Run engine dry or add fuel stabilizer.
2. Change oil at end of season.
3. Clean entire machine thoroughly.
4. Lubricate all moving parts.
5. Store in a dry, covered area.

WARNING! Never store with fuel in tank indoors or near open flame.

Safety Guidelines

Always prioritize safety when operating or maintaining the snow thrower.

1. Read manual completely before use.
2. Clear area of debris before operation.
3. Wear appropriate clothing and eye protection.
4. Keep hands and feet away from moving parts.
5. Never operate on slopes greater than recommended.
6. Disconnect spark plug for maintenance.

DANGER! Rotating auger can cause severe injury. Always use safety controls.

Warranty Information

Ariens provides a limited warranty for residential use. Coverage includes defects in materials and workmanship. Commercial use may void warranty. For claims, contact authorized Ariens service dealer with proof of purchase. Warranty period: 2 years from date of purchase. For details, visit www.ariens.com or call 1-800-678-5443.

Troubleshooting

Service: For repairs, contact authorized Ariens dealer. Customer Support: 1-800-678-5443; www.ariens.com