Ariens Model 920014 Manual

The Ariens Model 920014 is a compact, high-performance snow blower designed for residential use. It features a reliable engine, durable steel auger, adjustable discharge chute, easy-turn steering, and electric start capability. Below are key sections covering safety, features, operation, maintenance, troubleshooting, and specifications.

1. Features at a Glance 2. Safety Information 3. Assembly & Setup 4. Controls and Operation 5. Maintenance Schedule 6. Storage Instructions 7. Troubleshooting 8. Specifications 9. Warranty Information

Features at a Glance

Key components: Engine, Auger Housing, Discharge Chute, Skid Shoes, Drive System, Electric Start, and Control Panel.

Feature	Description
Engine	Reliable 4-cycle engine with electric start capability
Auger	Durable steel auger for efficient snow removal
Discharge Chute	Adjustable chute with remote control for direction
Skid Shoes	Adjustable for controlling clearance height
Drive System	Single-speed forward with easy-turn steering
Electric Start	Plug-in electric start for easy ignition
Control Panel	Centralized controls for auger and drive engagement
Chute Cleanout Tool	Included tool for clearing clogs safely
Headlight	Integrated headlight for visibility in low light
Warranty	Limited warranty as specified in manual

Safety Information

Read and understand all safety instructions before operation.

Clear area: Remove obstacles like rocks, wires, or debris before use.
Protective gear: Wear safety glasses, gloves, and non-slip footwear.
Fuel safety: Refuel outdoors with engine off and cool. Use fresh fuel.
Keep clear: Keep hands and feet away from moving parts.
Children/pets: Keep bystanders away during operation.

WARNING! Never operate without proper guards in place. Do not modify engine or safety devices.

Assembly & Setup

Unpack and inspect all parts. Assembly requires basic tools.

Handle assembly: Attach upper and lower handles with provided hardware.
Discharge chute: Install chute assembly onto housing; secure bolts.
Control cables: Route and connect auger and drive control cables per diagram.
Skid shoes: Install and adjust to desired height.
Add oil and fuel: Fill engine with recommended oil; add fresh gasoline.

CAUTION! Ensure all bolts are tightened securely. Check for loose parts before starting.

Controls and Operation

Familiarize yourself with controls before starting engine.

Control Panel: Electric Start Button, Auger Engagement Lever, Drive Engagement Lever, Chute Direction Control, Ignition Key.

Starting: Insert key, set choke (if cold), press electric start or use recoil. Operation: Engage auger lever to begin snow throwing; engage drive lever to move forward. Adjust chute direction using control knob. Stopping: Release auger and drive levers; turn key to OFF.

Maintenance Schedule

Before each use: Check oil level, inspect for loose parts, check skid shoes.
After 5 hours: Check and tighten hardware; inspect auger paddles.
After each season: Change engine oil; check spark plug; lubricate control cables and chute mechanism.
Every 2 seasons: Replace fuel filter; inspect drive belt.
Storage: Refer to Storage Instructions section.

Storage Instructions

Proper storage extends machine life.

Fuel system: Run engine dry or add fuel stabilizer; run for 5 minutes.
Engine: Change oil; remove spark plug and add teaspoon of oil into cylinder.
Clean: Wash machine thoroughly; dry completely to prevent rust.
Lubricate: Apply grease to auger shaft and chute pivot points.
Store: Keep in dry, covered area; cover machine to protect from dust.

Tip: Store with auger and drive controls disengaged.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	No fuel, bad spark plug, choke setting	Check fuel level; inspect spark plug; adjust choke.
Electric start not working	Dead battery, loose connection	Check battery charge; ensure plug is securely connected.
Auger not turning	Shear pin broken, control cable issue	Replace shear pin; check cable adjustment.
Poor snow discharge	Clogged chute, worn paddles	Clear chute with tool; inspect/replace auger paddles.
Machine doesn't move	Drive belt loose, control cable	Check drive belt tension; adjust drive cable.

Reset: Always disconnect spark plug before performing maintenance.

Service: Contact authorized Ariens service center for major repairs.

Specifications

Model: 920014
Engine Type: 4-cycle, single cylinder
Clearing Width: 24 inches
Intake Height: 20 inches
Throw Distance: Up to 30 feet
Drive System: Single-speed forward
Starting System: Electric start with recoil backup
Fuel Capacity: 1.5 gallons
Weight: Approx. 180 lbs
Warranty: Limited 2-year residential warranty

Warranty Information

Ariens Company provides a limited warranty for residential use. Warranty covers defects in materials and workmanship for specified periods from date of purchase. Proof of purchase required. Warranty does not cover normal wear, misuse, or improper maintenance. For warranty service, contact an authorized Ariens dealer or call 1-800-678-5443. Visit www.ariens.com for complete warranty terms.