Ariens Deluxe 30 Manual

The Ariens Deluxe 30 is a powerful 30-inch two-stage snow blower designed for heavy-duty snow removal. It features a robust engine, electric start, power steering, serrated steel augers, adjustable skid shoes, and a durable steel construction. Below are key sections for safety, features, operation, maintenance, troubleshooting, and specifications.

Features at a Glance

Key components: 30-inch clearing width, Two-stage auger system, Electric start with key, Power steering, 6 forward speeds, 2 reverse speeds, Headlight, Serrated steel augers, Adjustable skid shoes, Chute control with crank.

Assembly & Setup

Unpack and inspect all parts. Assembly requires basic tools.

1. Attach handles: Secure upper and lower handles with provided bolts.
2. Install chute assembly: Attach discharge chute and secure with hardware.
3. Connect control cables: Attach chute control and auger engagement cables.
4. Add engine oil: Fill with recommended SAE 5W-30 oil (check manual for capacity).
5. Add fuel: Use fresh unleaded gasoline (consult manual for octane rating).
6. Install battery: For electric start models, connect battery terminals.

WARNING! Wear gloves during assembly. Ensure all bolts are tightened securely. Keep hands clear of auger during setup.

Operation Instructions

Before starting, read all safety instructions. Operate only in clear, well-lit areas.

1. Starting: For electric start, insert key and turn. For manual start, set choke and pull cord.
2. Engaging auger: Pull auger engagement lever to activate auger and impeller.
3. Select speed: Use shift lever to choose appropriate forward or reverse speed.
4. Steering: Use power steering for easier turns; reduce speed on uneven terrain.
5. Chute direction: Turn chute crank to direct snow discharge away from work area.
6. Height adjustment: Adjust skid shoes for proper clearance over surfaces.
7. Shutting down: Release auger lever, turn off engine, and remove key.

CAUTION! Never attempt to clear clogged auger with hands. Always turn off engine and remove key before any maintenance.

Specifications

• Clearing Width: 30 inches.
• Clearing Depth: Up to 21 inches.
• Engine Type: 4-cycle OHV gasoline engine.
• Starting System: Electric start with key (manual recoil backup).
• Drive System: Friction disc with 6 forward, 2 reverse speeds.
• Auger Type: Two-stage serrated steel.
• Chute Control: Manual crank, 200-degree rotation.
• Skid Shoes: Adjustable steel.
• Dimensions: Refer to manual for exact measurements.
• Weight: Approximately 300 lbs (varies by model).

Controls and Adjustments

Main controls located on handle panel. Auger engagement lever, speed shift lever, chute control crank, skid shoe adjustment bolts.

Adjustments: Skid shoes: Loosen bolts, set height, retighten. Chute direction: Turn crank clockwise/counterclockwise. Drive speed: Shift lever for terrain conditions.

Maintenance controls: Oil drain plug, fuel shut-off valve, spark plug access.

Maintenance Schedule

Regular maintenance ensures optimal performance and longevity.

1. Before each use: Check oil level, fuel level, tire pressure, and auger shear pins.
2. After each use: Clean snow and debris from machine.
3. Every 25 hours: Change engine oil (check manual for specific oil type).
4. Every 50 hours: Inspect spark plug, replace if necessary.
5. Seasonally: Lubricate control cables and pivot points; check belts for wear.
6. Annually: Replace fuel filter; inspect auger paddles and scraper bar.

Tip: Use only Ariens-approved parts for replacements. Keep maintenance records.

Storage & Off-Season Care

Proper storage prevents damage and ensures readiness for next season.

1. Fuel system: Add fuel stabilizer to tank, run engine for 5 minutes, then drain or run dry.
2. Engine: Change oil and replace spark plug if due.
3. Cleaning: Thoroughly clean entire machine, removing all snow, ice, and debris.
4. Lubrication: Apply lubricant to all moving parts and cables.
5. Storage location: Store in dry, covered area; protect from moisture.
6. Tires: Inflate to recommended pressure; consider placing on blocks.

WARNING! Never store with fuel in tank without stabilizer. Disconnect battery if equipped.

Safety Guidelines

Always prioritize safety when operating or maintaining the snow blower.

• Wear appropriate clothing: Safety glasses, gloves, non-slip boots.
• Clear area: Remove obstacles like rocks, branches before operation.
• Keep hands and feet away: Never clear clogged auger with hands; use clearing tool.
• Operate in visibility: Use headlight in low light; be aware of surroundings.
• Children and pets: Keep at a safe distance during operation.
• Slopes: Exercise caution on inclines; avoid steep slopes.

CAUTION! Read and understand all safety labels on machine. Refer to manual for complete safety information.

Warranty Information

Ariens Deluxe 30 comes with a limited warranty covering defects in materials and workmanship. Residential warranty period may vary (typically 3 years for auger housing, 2 years for engine, lifetime on torsion bar). Commercial use may have different terms. Proof of purchase required. For warranty claims, contact an authorized Ariens dealer or visit www.ariens.com. Keep this manual and purchase receipt for reference.

Troubleshooting

Service: For technical support, contact Ariens Customer Service at 1-920-756-4688 or visit www.ariens.com. Use only authorized service centers for repairs.