The Ariens Deluxe 28 is a high-performance, two-stage snow thrower designed for heavy-duty snow removal. It features a 28-inch clearing width, a powerful engine, electric start capability, power steering, and durable steel construction. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.
Key components: 28-inch clearing width, Two-stage auger system, Electric start with key, Power steering, 6 forward speeds & 2 reverse speeds, Headlight, Drift cutters, Skid shoes.
| Feature | Description |
|---|---|
| Clearing Width | 28 inches for efficient snow removal |
| Engine | Powerful OHV engine with electric start |
| Drive System | 6 forward speeds, 2 reverse speeds |
| Steering | Power steering for easy maneuverability |
| Auger System | Two-stage design with serrated steel augers |
| Chute Control | 360-degree rotation with remote deflector |
| Headlight | LED headlight for visibility in low light |
| Construction | Durable steel frame and auger housing |
| Tires | Large, deep-tread tires for traction |
| Warranty | Limited warranty as specified by Ariens |
Unpack and inspect all parts. Assembly requires basic tools.
WARNING! Always wear protective gloves during assembly. Ensure all bolts are tightened securely.
Prepare the snow thrower for its first use.
CAUTION! Perform setup in a well-ventilated area, away from sparks or open flames.
Unpack and inspect all parts. Assembly requires basic tools.
WARNING! Always wear protective gloves during assembly. Ensure all bolts are tightened securely.
Prepare the snow thrower for its first use.
CAUTION! Perform setup in a well-ventilated area, away from sparks or open flames.
Familiarize yourself with all controls before starting.
Key Controls: Electric Start Key, Auger Engagement Lever, Drive Control Lever, Speed Selector, Chute Rotation Crank, Chute Deflector Lever, Headlight Switch.
Starting Procedure: 1. Insert key. 2. Set choke if engine is cold. 3. Turn key to START. 4. Allow engine to warm up.
Operating Tips: Select appropriate speed for snow conditions. Engage auger before entering snow. Use power steering for turns. Clear discharge chute if clogged.
Regular maintenance ensures longevity and performance.
| Interval | Task |
|---|---|
| Before each use | Check oil level, tire pressure, and fasteners |
| Every 5 hours | Lubricate auger shaft, chute mechanism, and drive components |
| Every season | Change engine oil, check spark plug, inspect scraper bar and skid shoes |
| Every 2 seasons | Replace fuel filter, check and adjust drive belts |
| As needed | Sharpen or replace auger scraper bar |
Note: Always refer to the engine manual for specific engine maintenance.
Proper storage prevents damage and prepares for next season.
CAUTION! Never store with fuel in the tank indoors or in an enclosed space without proper stabilization.
This machine includes several safety mechanisms.
WARNING! Always read the safety section of the full manual before operation. Never attempt to clear a clogged chute with hands or feet while engine is running.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Engine won't start | No fuel, bad spark plug, choke not set | Check fuel level, inspect spark plug, ensure choke is ON for cold start. |
| Electric start doesn't work | Dead battery, loose connection | Charge or replace battery; check cable connections. |
| Loss of power | Clogged fuel filter, old gasoline | Replace fuel filter; drain and refill with fresh gas. |
| Auger won't turn | Shear pin broken, control cable loose | Replace shear pin(s); adjust auger engagement cable. |
| Poor traction | Low tire pressure, worn tires | Inflate tires to recommended PSI; replace if worn. |
| Uneven clearing | Skid shoes unevenly adjusted | Adjust both skid shoes to the same height. |
Service: For repairs beyond basic maintenance, contact an authorized Ariens service dealer.