Ariens Deluxe 28 Parts Manual

The Ariens Deluxe 28 is a high-performance snow thrower designed for heavy-duty residential and commercial use. This parts manual provides detailed diagrams, part numbers, and ordering information for the complete assembly, engine, drive system, auger, chute, controls, and electrical components. Below are key sections for identification, assembly breakdown, replacement procedures, and ordering.

Model Identification & Serial Number

Locate the model and serial number plate on the frame. This information is required for ordering correct parts.

NOTE: Always provide model and serial number when ordering parts.

Assembly Overview

Major assemblies of the Ariens Deluxe 28 snow thrower.

1. Main Frame & Handle Assembly
2. Engine & Mounting Plate
3. Drive System (Transmission, Drive Belt, Wheels)
4. Auger Housing & Impeller Housing
5. Chute Assembly & Deflector
6. Control Panel & Cables

WARNING! Disconnect spark plug before performing any maintenance or parts replacement.

Engine Components

Parts for the engine (typically Briggs & Stratton).

• Engine Model: As specified on serial plate.
• Air Filter: Replaceable foam or paper element.
• Spark Plug: Standard gap specification.
• Carburetor & Fuel System: Fuel lines, filter, primer bulb.
• Starter Assembly: Recoil starter parts.
• Oil Drain Plug & Dipstick: For engine maintenance.

Drive System & Transmission

Components for wheel drive and speed control.

Key Parts: Drive belt, friction disc, shift cable, axle, wheel hub, transmission gears.

Procedure for belt replacement: Release tension, remove belt guard, replace belt, re-tension.

CAUTION! Ensure machine is on level surface and wheels blocked during service.

Auger & Impeller Assembly

Snow intake and discharge components.

1. Auger Blades (Paddles): Left and right shear pins/bolts.
2. Auger Shaft & Bearings: Shaft, housing, bearing retainer.
3. Impeller Blades & Hub: Mounted on second stage.
4. Shear Pins/Bolts: Replace if auger strikes object.
5. Auger Belt & Tensioner: Drives auger rotation.

WARNING! Always replace shear pins with identical grade/specification.

Chute & Deflector Controls

Parts for directing snow discharge.

Control Cables & Handles

Operator control components.

• Drive Control Lever/Cable: Engages wheel drive.
• Auger Control Lever/Cable: Engages auger/impeller.
• Shift Lever & Rod: Selects speed/direction.
• Handle Grips & Knobs: Comfort grips, adjustment knobs.
• Safety Keys & Interlocks: Ensures safe operation.

Tip: Lubricate cable ends periodically for smooth operation.

Wheels & Skid Shoes

Traction and height adjustment parts.

1. Wheels & Tires: Size as per model specification.
2. Axle & Spacers: Secures wheels to frame.
3. Skid Shoes: Adjustable for scraping height.
4. Bolts & Lock Nuts: For wheel and shoe attachment.

CAUTION! Ensure wheels are securely fastened before use.

Electrical System

Wiring and electrical components (if equipped with electric start).

Key Parts: Battery (if applicable), wiring harness, ignition key switch, starter solenoid, safety switch, headlight bulb/assembly.

WARNING! Disconnect battery before servicing electrical components.

Fasteners & Hardware

Standard hardware used in assembly.

• Bolts: Hex head, carriage, shoulder bolts.
• Nuts: Lock nuts, flange nuts.
• Washers & Spacers: Flat, lock, thrust washers.
• Pins: Cotter pins, roll pins, shear pins.
• Belts: Drive belt, auger belt (part numbers specified).

Parts Ordering & Exploded Views

Use exploded view diagrams to identify part numbers and assembly relationships.

Ordering: Contact Ariens dealer or visit www.ariens.com with model/serial number and part number.

Support: 1-800-XXX-XXXX; www.ariens.com