Ariens Deluxe 24 Manual

The Ariens Deluxe 24 is a high-performance 24-inch two-stage snow blower designed for heavy-duty snow removal. It features a powerful engine, electric start, power steering, serrated steel augers, adjustable skid shoes, and a durable steel construction. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 24-inch clearing width, Two-stage auger system, Electric start with key, Power steering, 6 forward speeds plus reverse, Headlight, Serrated steel augers, Adjustable discharge chute.

Feature	Description
Clearing Width	24 inches for efficient snow removal
Auger System	Two-stage serrated steel augers for breaking up packed snow
Engine	Powerful OHV engine with electric start
Power Steering	Provides easy maneuverability in heavy snow
Drive System	6 forward speeds and 2 reverse speeds
Discharge Chute	Adjustable 190-degree rotation with crank control
Skid Shoes	Adjustable for controlling scraper bar height
Headlight	Built-in for visibility in low-light conditions
Construction	Durable steel frame and auger housing
Tires	Heavy-duty tires with aggressive tread

Safety Information

Read and understand all safety instructions before operation.

1. Always wear appropriate clothing and eye protection.
2. Keep hands and feet away from moving parts.
3. Clear area of debris before operation.
4. Never operate without proper guards in place.
5. Turn off engine and remove key before performing maintenance.

WARNING! Risk of serious injury or death. Never attempt to clear clogged auger or chute with engine running. Always use cleanout tool provided.

Assembly & Setup

Unpack and inspect all parts. Assembly requires basic tools.

1. Attach handles: Secure with provided bolts and hardware.
2. Install discharge chute: Attach to housing and secure with pins.
3. Attach skid shoes: Install on both sides of housing.
4. Connect control cables: Follow routing diagram in manual.
5. Add engine oil: Use recommended SAE 5W-30 synthetic oil.
6. Add fuel: Use fresh unleaded gasoline with stabilizer.

CAUTION! Ensure all bolts are properly tightened. Check cable adjustments before first use.

Specifications

• Clearing Width: 24 inches
• Clearing Depth: Up to 21 inches
• Engine: 254cc Ariens AX Engine
• Starting System: Electric start with key (120V cord included)
• Drive System: Friction disc with 6 forward, 2 reverse speeds
• Auger Material: Serrated steel
• Chute Control: Crank-operated, 190-degree rotation
• Chute Deflector: Lever control
• Tires: 13 x 4.00-6 with aggressive tread
• Weight: Approximately 243 lbs

Controls and Operation

Familiarize yourself with all controls before operation.

Control Panel: Electric start switch, Choke control, Throttle control, Auger engagement lever, Drive control lever, Chute rotation crank, Chute deflector lever.

Speed Selection: 6 forward speeds (1 slowest, 6 fastest), 2 reverse speeds. Auger Control: Engage only when ready to clear snow. Chute Control: Rotate 190 degrees with crank, adjust angle with deflector lever. Steering: Power steering activates when drive lever is engaged.

Starting the Engine

Follow these steps for safe engine starting.

1. Move unit to clear area outdoors.
2. Check oil and fuel levels.
3. Set throttle to FAST position.
4. Set choke to FULL position (cold engine).
5. Turn key to START position (electric) or pull recoil starter (manual).
6. After engine starts, gradually move choke to OFF position.
7. Allow engine to warm up for 2-3 minutes.

Tip: For electric start, plug cord into unit first, then into 120V outlet.

Operating Instructions

Proper technique ensures efficient snow removal.

1. Select appropriate speed for snow conditions (slower for heavy/wet snow).
2. Engage auger before entering snow.
3. Overlap each pass by several inches for complete clearing.
4. Adjust discharge chute direction before engaging auger.
5. Use lower speeds when turning or maneuvering.
6. For slopes, operate across slope, not up and down.
7. If unit becomes clogged, turn off engine and use cleanout tool.
8. After use, run engine for a few minutes to dry internal components.

WARNING! Never operate on gravel surfaces without adjusting skid shoes to protect auger.

Maintenance Schedule

Regular maintenance ensures optimal performance and longevity.

Interval	Maintenance Task
Before each use	Check oil level, tire pressure, controls
Every 5 hours	Check auger shear pins, skid shoes
Every 25 hours	Change engine oil, check spark plug
Every 50 hours	Lubricate all pivot points, check belts
Season end	Complete storage preparation

Note: Refer to engine manual for specific engine maintenance requirements.

Storage & Off-Season Care

Proper storage prevents damage and ensures ready operation next season.

1. Run engine until fuel tank is empty or add fuel stabilizer.
2. Change engine oil while engine is warm.
3. Remove spark plug and add teaspoon of oil to cylinder.
4. Lubricate all moving parts and pivot points.
5. Clean entire unit, removing all snow and debris.
6. Store in dry location, protected from elements.
7. Cover unit to prevent dust accumulation.

CAUTION! Never store with fuel in tank without stabilizer. Fuel deteriorates and can damage engine.

Warranty Information

Ariens Deluxe 24 comes with limited warranty. Residential use: 3-year limited warranty on entire unit, 5-year limited warranty on auger housing. Commercial use: 90-day limited warranty. Proof of purchase required. Warranty does not cover normal wear, improper maintenance, or misuse. For warranty service, contact authorized Ariens dealer. Keep this manual and purchase receipt for warranty claims.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issues, spark plug, safety switch	Check fuel level and quality; inspect spark plug; ensure all safety switches engaged.
Electric start not working	Power cord, battery, switch	Check cord connection; ensure outlet has power; check starter switch.
Loss of power	Drive belt, shear pins	Inspect drive belt for wear; check auger shear pins.
Poor snow discharge	Auger speed, chute clog	Increase engine speed; clear chute obstruction.
Uneven clearing	Skid shoe adjustment	Adjust skid shoes to level unit.
Hard steering	Tire pressure, friction disc	Check and adjust tire pressure; inspect friction disc.

Service: For technical support, contact Ariens Customer Service at 1-920-756-4688 or visit www.ariens.com