Ariens 926001 Parts Manual

The Ariens 926001 Parts Manual provides detailed information, diagrams, and part numbers for the Ariens 926001 model. This manual is essential for identifying, ordering, and replacing components to ensure proper maintenance and repair of your equipment. Below are key sections covering parts identification, diagrams, ordering information, and maintenance guidelines.

1. Introduction & Safety 2. Parts Identification 3. Exploded Diagrams 4. Part Numbers & Descriptions 5. Ordering Parts 6. Assembly Instructions 7. Maintenance Parts 8. Troubleshooting Parts Issues 9. Warranty Information 10. Contact & Support

Introduction & Safety

This manual is intended for use by qualified technicians and owners for parts identification and replacement. Always follow safety precautions when handling parts.

Safety Symbol	Meaning
⚠️	Warning - Risk of injury or damage
🔧	Tools required for assembly/replacement
📋	Refer to manual for specific instructions

WARNING! Disconnect power source and wear protective gear before handling parts. Use only Ariens-approved parts.

Parts Identification

Key components of the Ariens 926001 model include engine parts, drive system, cutting deck, controls, and hardware.

Engine Assembly: Includes carburetor, spark plug, air filter, and fuel system parts.
Drive System: Belts, pulleys, transmission, and axle components.
Cutting Deck: Blades, spindles, deck housing, and mounting hardware.
Controls: Levers, cables, switches, and dashboard components.
Hardware: Bolts, nuts, washers, and pins specific to the model.

Note: Always verify part numbers against diagrams before ordering.

Exploded Diagrams

Refer to diagrams for visual part location and assembly relationships.

Diagram A: Engine Assembly - Shows all engine-related parts.
Diagram B: Cutting Deck - Illustrates blade and spindle arrangement.
Diagram C: Drive System - Details belts, pulleys, and transmission.
Diagram D: Controls & Dashboard - Highlights levers, cables, and switches.
Diagram E: Hardware & Fasteners - Lists all bolts, nuts, and pins.

Tip: Match numbers in diagrams to part numbers in the list.

Part Numbers & Descriptions

Part Number	Description	Qty
926001-001	Blade, Cutting	2
926001-002	Spindle Assembly	2
926001-003	Drive Belt	1
926001-004	Air Filter	1
926001-005	Spark Plug	1
926001-006	Control Cable	1
926001-007	Deck Housing	1
926001-008	Pulley, Idler	1
926001-009	Bolt, Mounting (M8 x 25mm)	4
926001-010	Nut, Lock (M8)	4

Note: Quantities are per unit unless specified otherwise.

Ordering Parts

To order parts, contact an authorized Ariens dealer or use the online parts portal.

Identify the part number from the manual.
Contact Ariens dealer with model number (926001) and part number.
Provide serial number for exact match.
Verify availability and shipping details.

Online: Visit www.ariens.com/parts, enter model 926001, and select parts.

Assembly Instructions

Follow these steps for part replacement or assembly.

Disconnect spark plug and battery for safety.
Refer to exploded diagram for part location.
Use appropriate tools (wrenches, sockets).
Install new part following torque specifications.
Reassemble and test operation.

WARNING! Do not overtighten bolts; refer to torque specs in manual.

Maintenance Parts

Regular maintenance parts include filters, blades, belts, and spark plugs.

Air Filter: Replace every 25 hours of operation.
Blades: Sharpen or replace when dull or damaged.
Drive Belt: Inspect for wear; replace if cracked.
Spark Plug: Replace annually or per operating hours.
Lubricants: Use Ariens-approved grease and oil.

Tip: Keep spare maintenance parts on hand for timely replacement.

Troubleshooting Parts Issues

Issue	Possible Part	Solution
Engine won't start	Spark plug, air filter	Replace spark plug; clean or replace air filter.
Poor cutting performance	Blades, drive belt	Sharpen or replace blades; inspect and replace belt if worn.
Vibration or noise	Spindle, mounting bolts	Check spindle assembly; tighten or replace bolts.
Control stiffness	Control cable	Lubricate or replace control cable.
Deck misalignment	Deck housing, hardware	Adjust deck; replace damaged housing or hardware.

Note: If issue persists, contact authorized service.

Warranty Information

Ariens parts are covered under warranty against defects in materials and workmanship.

Duration: Varies by part; refer to warranty card.
Coverage: Defective parts replaced or repaired at no charge.
Exclusions: Normal wear, misuse, or unauthorized repairs.
Claim Process: Contact dealer with proof of purchase and part number.

WARNING! Warranty void if non-Ariens parts are used.

Contact & Support

For parts inquiries, technical support, or warranty claims, contact Ariens.

Ariens Company: 655 West Ryan Street, Brillion, WI 54110

Phone: 1-920-756-2141

Website: www.ariens.com

Email: [email protected]

Hours: Mon-Fri, 8:00 AM - 5:00 PM CST