Ariens 2200 Lawn Mower Manual

The Ariens 2200 is a powerful 21-inch self-propelled walk-behind lawn mower featuring a 159cc Briggs & Stratton engine, 3-in-1 cutting system (mulch/bag/side discharge), 6-position single-lever height adjustment, durable steel deck, easy-start technology, and rear-wheel drive. This manual covers safety, operation, maintenance, troubleshooting, and specifications for optimal performance and longevity.

1. Features at a Glance 2. Safety Information 3. Assembly & Setup 4. Specifications 5. Controls and Operation 6. Cutting System Setup 7. Maintenance Schedule 8. Storage Guidelines 9. Warranty Information 10. Parts Diagram 11. Troubleshooting

Features at a Glance

Key components: 159cc Briggs & Stratton engine, 21-inch steel cutting deck, rear-wheel drive system, 3-in-1 discharge chute, single-lever height adjuster, fold-down handle, and washout port.

Feature	Description
Engine	159cc Briggs & Stratton 675 Series, OHV
Cutting Width	21 inches
Cutting Height	1.5 to 4 inches (6 positions)
Drive System	Self-propelled rear-wheel drive
Cutting System	3-in-1 (mulch, bag, side discharge)
Deck Material	Durable steel construction
Start System	Recoil start with easy-start technology
Wheels	8-inch rear, 7-inch front
Fuel Capacity	0.95 gallons
Handle	Fold-down for compact storage

Safety Information

Read all instructions before operating. Always wear appropriate safety gear.

Clear mowing area of debris, stones, and toys before use.
Never operate without proper guards, plates, or grass catcher.
Do not mow wet grass or in poor lighting conditions.
Keep hands and feet away from rotating blades.
Stop engine and disconnect spark plug before maintenance.

WARNING! Gasoline is flammable; store in approved container away from ignition sources. Keep bystanders and pets away during operation.

Assembly & Setup

Unpack and inspect all parts. Assembly requires basic tools (included).

Attach handle: Secure upper and lower sections with provided bolts.
Install wheels: Insert axles and secure with retaining clips.
Attach discharge chute: Align with deck opening and secure with wing nut.
Install grass bag: Hook onto rear deck brackets.
Add oil and gasoline: Use SAE 30 oil (20 oz) and unleaded gasoline (87 octane).

CAUTION! Ensure all fasteners are tight before operation. Do not over-tighten plastic components.

Specifications

Model: Ariens 2200
Engine: Briggs & Stratton 675 Series, 159cc, OHV
Cutting Width: 21 inches
Cutting Height Range: 1.5 - 4 inches
Drive System: Self-propelled rear-wheel drive
Wheels: 8-inch rear, 7-inch front
Deck Material: Steel
Fuel Type: Unleaded gasoline (87 octane)
Fuel Capacity: 0.95 gallons
Oil Type: SAE 30 (20 oz capacity)
Weight: 75 lbs (approx.)

Controls and Operation

Handle Controls: Drive control lever, height adjustment lever, engine throttle, recoil starter.

Starting Procedure:

Check oil and fuel levels.
Move throttle to FAST position.
Prime engine (3-4 presses).
Pull recoil starter firmly.
Adjust speed with drive control lever.

Stopping: Release drive lever, move throttle to STOP, wait for blades to stop.

Height Adjustment: Move single lever to desired position (1-6).

Cutting System Setup

Configure for mulching, bagging, or side discharge.

Mulching: Install mulch plug in discharge opening.
Bagging: Attach grass bag to rear brackets.
Side Discharge: Remove mulch plug; ensure discharge chute is installed.

Tip: For best mulching results, mow when grass is dry and not too tall.

Maintenance Schedule

Interval	Task
Before each use	Check oil level, inspect blades, clear deck
Every 25 hours	Change oil (first change at 5 hours)
Every season	Replace air filter, spark plug
As needed	Sharpen/replace blades, clean deck
Every 2 years	Replace fuel filter

Blade Sharpening: Remove blade; maintain original cutting angle. Balance before reinstalling.

Storage Guidelines

Prepare mower for off-season storage.

Run engine to burn remaining fuel or add fuel stabilizer.
Change oil and replace air filter.
Clean underside of deck thoroughly.
Remove spark plug; add 1 oz oil to cylinder; pull starter slowly.
Store in dry, covered area.

CAUTION! Never store with gasoline in tank indoors. Use fuel stabilizer if storing with fuel.

Warranty Information

Ariens 2200 includes a 3-year limited warranty for residential use. Warranty covers defects in materials/workmanship. Not covered: normal wear, improper maintenance, commercial use. Register product at www.ariens.com within 30 days of purchase. Keep receipt for proof of purchase.

Parts Diagram

Refer to exploded view diagram for part numbers and assembly. Common replacement parts:

Blade: Part # 21541500
Air Filter: Part # 21541600
Spark Plug: Champion RC12YC
Drive Belt: Part # 21541700
Wheel Set: Part # 21541800

Order parts through authorized Ariens dealers or www.ariens.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	No fuel, old gasoline, clogged filter	Check fuel level; use fresh gas; replace fuel filter.
Poor cutting performance	Dull blade, low engine speed	Sharpen/replace blade; set throttle to FAST.
Uneven cut	Uneven tire pressure, worn blade	Inflate tires evenly; balance or replace blade.
Excessive vibration	Loose blade, bent blade	Tighten blade bolt; replace bent blade.
Self-propel not working	Drive belt worn, control cable loose	Inspect/replace drive belt; adjust cable tension.

Service: For technical support, contact Ariens Customer Service at 1-800-678-5443 or visit www.ariens.com.